Co2 laser marking machine water chiller security user measures
As we all know, the YAG laser marking machine and CO2 laser marking machine all needs use water chiller, the following safety precautions to be noted that prior to the use of water chiller
As we all know, the YAG laser marking machine and CO2 laser marking machine all needs use water chiller, the following safety precautions to be noted that prior to the use of water chiller.
1, Keeping laser marking machine with water chiller working range clean and well ventilated through light, messy and dark work environment could easily lead to an accident.
2. Do not let children play near the laser marking machine working range.non-operators should be in a safe place outside of the work area.
3. Please do not use water chiller in wet or potentially explosive areas.
4. Refer to the equipment nameplate electrical parameters, choose the appropriate power cord, it must be a national standard power cord. For example, the general semiconductor marking machine, to use the country's electricity 2.5 square Source line, and 1P chillers will have to use 1.5 square wire.
5. Do not place debris or tools on top of the laser marking machine, to prevent the loot cause injury or damage to the standard equipment units to fight.
6. Each time moving equipment or replacement work place, turn the power off.
7. If there has any self-service repair, inspection, or replacement parts, please note the following:
A:First adjust the operation switch or circuit protection switch to the OFF position, and cut off the power, re-replacement elements.
B:If the laser marking machine water chiller needs to discharge refrigerant R22, please emissions in a well ventilated place to prevent suffocation.