Focus on CNC Laser manufacturing over 10 years,
More than 10,000 customers choose Dekcel.

24 hour service hotline
CNC knowledge
Home > Support > CNC knowledge >

CNC knowledge

How to improve the fiber laser marking machine service life

Correct use fiber laser marking machine can prolong few years use-life,fiber laser marking machine high stability, long use life, widely used, good marking effect Since the fiber fiber laser marking machine is expensive, in daily production should pay particular attention to maintenance
Correct use fiber laser marking machine can prolong few years use-life,fiber laser marking machine high stability, long use life, widely used, good marking effect.Since the fiber fiber laser marking machine is expensive, in daily production should pay particular attention to maintenance.
 
(1) Fiber laser marking machine during the operation, do not touch the beam;
(2) The laser generator is fiber laser marking machine core,we must move carefully to avoid improper mobile crusher;
(3) In the operation, once found fault, to be stopped immediately in order to avoid casualties;
(4) Fiber laser marking machine can not be started at the wrong time of the water cycle;
(5) Prepare to turn off the fiber marking machine, need to set the current about 5A;
(6) Working area should be higher than the operating format;
(7) After use equipment long time, we need to erase surface dust with a clean dry rag;
(8) Field lens after long time use will become blurred or dust etc,with a clean cotton swab dipped in alcohol under the surface of the lens until the lens surface clean.
(9) After stop the fiber laser marking machine half an hour,clean working table,use clean cloth cover the fiber laser  marking to prevent dust from interior equipment.

fiber laser marking machine

CONTACT DEKCEL

DEKCELCNC

Address:E-15, Huaqiang International, Shanda Road, Lixia District, Jinan, Shandong,China

Tel:+86-13356681090

E-mail:info@dekcelcnc.com

Website:www.dekcelcnclaser.com

Live Chat
+86-13356681090